Io drivers

Way, you can successfully install the software.Method 2: Replace AsIO.dll and AsIO.sys FileAnother best solution to this error is replacing the AsIO.dll files and the AsIO.sys file according to the following ways –Step 1: Download the latest AI Suite package according to your motherboard from Asus’ official site.Step 2: Open the ZIP file and extract the contained folder.Step 3: After extracting, find the DrvResource folder inside this folder.Step 4: Locate the folder named Io. It contains the AsIO.dll file.Step 5: Now, navigate to the AI Suite Installation folder.Step 6: Go to the search bar at the top-right corner and search for AsIO.dll.Step 7: Then, replace all the AsIO.dll files with the one from DrvResource/Io.Step 8: Ensure to replace all the AsIO.dll in the AI Suite installation folder.Step 9: Now, navigate to local drive (C:) > Windows > SysWOW64 > drivers. Windows > SysWOW64 > drivers." srcset=" 750w, 300w" sizes="auto, (max-width: 750px) 100vw, 750px">Step 10: Replace the AsIO.sys file with the one from DrvResource/Io according to your Windows version. Such as for 64-bit you should use AsIO64.sys file to replace. To do so –Delete the AsIO.sys file in drivers. Now copy the AsIO64.sys file from DrvResource/Io and paste it in drivers. Rename it as AsIO.sys. Step 11: Close the windows and check if the error appears.Method 3: Reinstall AI SuiteWhen the previous methods fail to solve the problem for you, it’s time to go for a fresh install of the program. But before doing so, you must do some initial things.

Will need to have Rapture registered to be able to access this update. If you have not already registered Rapture, please register here . Download and install the V-Studio 700 Control Surface Plug-in version 1.2 update available here.Optional Installations: VS-700R IO Editor. Click here for more info . Free Dimension Pro Expansion Packs 1-3.Click here for more info. Rapture Expansion Packs 1 & 2. Click here for more info . Fantom VS Instrument Definitions.Click here for more info. Fantom VS x64 Hotfix. Click here for more info .Configuring SONAR 8.5 Producer for use with the VS-700 SET Power on both the VS-700R and VS-700C and then open SONAR In SONAR go to Options | Audio Under Advanced, set your Driver Mode to "ASIO". Click [Apply] if any changes were made. Under Drivers, make sure all of your VS-700 audio drivers are enabled under Input Drivers and Output Drivers. Click [Apply] if any changes were made. Under General, make sure your Playback Timing Master and your Record Timing Master are both set to the VS-700. Typically you will set the Playback Timing Master to the outputs your speakers are plugged in to on the VS-700R. In other words, if you are using the XLR outputs in the Monitor section, you will want to choose "MAIN (VS-700)" versus if you are using the 1/4" outputs where you would want to choose "SUB (VS-700)". Click [Apply] if any changes were made. Click [OK] to close the Audio Options menu In SONAR go to Options | MIDI Devices Select the following MIDI ports under both Inputs and Outputs: CONSOLE (VS-700), FANTOM VS (VS-700), and IO MIDI (VS-700). You do not need to enable ARX (VS-700), V-LINK (VS-700) or DV-7 (VS-700) unless you have the compatible hardware connected. NOTE: Do NOT select "IO (VS-700)". The "IO (VS-700)" MIDI port is used for firmware updates to the VS-700R and should not be enabled in SONAR. If it is enabled it will not harm your unit, however your pre-amps will not work properly unless you disable it and re-launch the application. Click [Apply] if any changes were

Dimension Pro, Beatscape and the Additional Content from the 4 installation discs. Download and install the SONAR 8.3.1 update available here. Install SONAR 8.5 Producer from the download included in your Cakewalk account. You can access your account here . If you do not have access to your download, please contact Customer Service. Download and install the SONAR 8.5.2 update available here. Download and install the SONAR 8.5.3 update available here. Download and install the Dimension Pro 1.5 update available here.Optional Installations: VS-700R IO Editor. Click here for more info . Free Dimension Pro Expansion Packs 1-3.Click here for more info. Fantom VS Instrument Definitions.Click here for more info. Fantom VS x64 Hotfix. Click here for more info .Configuring SONAR 8.5 Producer for use with the VS-700R Power on the VS-700R and then open SONAR In SONAR go to Options | Audio Under Advanced, set your Driver Mode to "ASIO". Click [Apply] if any changes were made. Under Drivers, make sure your VS-700 audio drivers are enabled under Input Drivers and Output Drivers. NOTE: when the VS-700R is used in stand-alone mode, the Monitor (VS-700 MAIN & VS-700 SUB) outputs are not available so they should not be selected in this menu. Click [Apply] if any changes were made. Under General, make sure your Playback Timing Master and your Record Timing Master are both set to the VS-700. Typically you will set the Playback Timing Master to the outputs your speakers are plugged in to on the VS-700R. NOTE: when the VS-700R is used in stand-alone mode, the Monitor (VS-700 MAIN & VS-700 SUB) outputs are not available. Click [Apply] if any changes were made. Click [OK] to close the Audio Options menu In SONAR go to Options | MIDI Devices Select the following MIDI ports under both Inputs and Outputs: FANTOM VS (VS-700), and IO MIDI (VS-700). You do not need to enable CONSOLE (VS-700), ARX (VS-700), V-LINK (VS-700) or DV-7 (VS-700) unless you have the compatible hardware connected. NOTE: Do NOT select "IO (VS-700)". The "IO (VS-700)" MIDI port is used for firmware updates to the VS-700R and