In uplink

To place an order, visit the Cisco Ordering homepage at Table 16. Cisco Catalyst 3650 Series Ordering Information Product Number Product Description Cisco Catalyst 3650 4x1G Uplink Series WS-C3650-24TS-L Standalone with Optional Stacking 24 10/100/1000 Ethernet and 4x1G Uplink ports, with 250WAC power supply, 1 RU, LAN Base feature set WS-C3650-48TS-L Standalone with Optional Stacking 48 10/100/1000 Ethernet and 4x1G Uplink ports, with 250WAC power supply, 1 RU, LAN Base feature set WS-C3650-24PS-L Standalone with Optional Stacking 24 10/100/1000 Ethernet PoE+ and 4x1G Uplink ports, with 640WAC power supply, 1 RU, LAN Base feature set WS-C3650-48PS-L Standalone with Optional Stacking 48 10/100/1000 Ethernet PoE+ and 4x1G Uplink ports, with 640WAC power supply, 1 RU, LAN Base feature set WS-C3650-48FS-L Standalone with Optional Stacking 48 10/100/1000 Ethernet PoE+ and 4x1G Uplink ports, with 1025WAC power supply, 1 RU, LAN Base feature set WS-C3650-24TS-S Standalone with Optional Stacking 24 10/100/1000 Ethernet and 4x1G Uplink ports, with 250WAC power supply, 1 RU, IP Base feature set WS-C3650-48TS-S Standalone with Optional Stacking 48 10/100/1000 Ethernet and 4x1G Uplink ports, with 250WAC power supply, 1 RU, IP Base feature set WS-C3650-24PS-S Standalone with Optional Stacking 24 10/100/1000 Ethernet PoE+ and 4x1G Uplink ports, with 640WAC power supply, 1 RU, IP Base feature set WS-C3650-48PS-S Standalone with Optional Stacking 48 10/100/1000 Ethernet PoE+ and 4x1G Uplink ports, with 640WAC power supply, 1 RU, IP Base feature set WS-C3650-48FS-S Standalone with Optional Stacking 48 10/100/1000 Ethernet PoE+ and 4x1G Uplink ports, with 1025WAC power supply, 1 RU, IP Base feature set WS-C3650-24TS-E Standalone with Optional Stacking 24 10/100/1000 Ethernet and 4x1G Uplink ports, with 250WAC power supply, 1 RU, IP Services feature set WS-C3650-48TS-E Standalone with Optional Stacking 48 10/100/1000 Ethernet and 4x1G Uplink ports, with 250WAC power supply, 1 RU, IP Services feature set WS-C3650-24PS-E Standalone with Optional Stacking 24 10/100/1000 Ethernet PoE+ and 4x1G Uplink ports, with 640WAC power supply, 1 RU, IP Services feature set WS-C3650-48PS-E Standalone with Optional Stacking 48 10/100/1000 Ethernet PoE+ and 4x1G Uplink ports, with 640WAC power supply, 1 RU, IP Services feature set WS-C3650-48FS-E Standalone with Optional Stacking 48 10/100/1000 Ethernet PoE+ and 4x1G Uplink ports, with 1025WAC power supply, 1 RU, IP Services feature set Cisco Catalyst 3650 2x10G and 2x1G Uplink Series WS-C3650-24TD-L Standalone with Optional Stacking 24 10/100/1000 Ethernet and 2x10G Uplink ports, with 250WAC power supply, 1 RU, LAN Base feature set WS-C3650-48TD-L Standalone with Optional Stacking 48 10/100/1000 Ethernet and 2x10G Uplink ports, with 250WAC power supply, 1 RU, LAN Base feature set WS-C3650-24PD-L Standalone with Optional Stacking 24 10/100/1000 Ethernet PoE+ and 2x10G Uplink ports, with 640WAC power supply, 1 RU, LAN Base feature set WS-C3650-24PDM-L Standalone with Optional Stacking 24 10/100/1000 Ethernet PoE+ and 2x10G Uplink ports, with fixed 640WAC power supply, 1 RU, LAN Base feature set WS-C3650-48PD-L Standalone with Optional Stacking 48 10/100/1000 Ethernet PoE+ and 2x10G Uplink ports, with 640WAC power supply, 1 RU, LAN Base feature set WS-C3650-48FD-L Standalone with Optional Stacking 48 10/100/1000 Ethernet PoE+ and 2x10G

Uplink ports, with 1025WAC power supply, 1 RU, LAN Base feature set WS-C3650-24TD-S Standalone with Optional Stacking 24 10/100/1000 Ethernet and 2x10G Uplink ports, with 250WAC power supply, 1 RU, IP Base feature set WS-C3650-48TD-S Standalone with Optional Stacking 48 10/100/1000 Ethernet and 2x10G Uplink ports, with 250WAC power supply, 1 RU, IP Base feature set WS-C3650-24PD-S Standalone with Optional Stacking 24 10/100/1000 Ethernet PoE+ and 2x10G Uplink ports, with 640WAC power supply, 1 RU, IP Base feature set WS-C3650-24PDM-S Standalone with Optional Stacking 24 10/100/1000 Ethernet PoE+ and 2x10G Uplink ports, with fixed 640WAC power supply, 1 RU, IP Base feature set WS-C3650-48PD-S Standalone with Optional Stacking 48 10/100/1000 Ethernet PoE+ and 2x10G Uplink ports, with 640WAC power supply, 1 RU, IP Base feature set WS-C3650-48FD-S Standalone with Optional Stacking 48 10/100/1000 Ethernet PoE+ and 2x10G Uplink ports, with 1025WAC power supply, 1 RU, IP Base feature set WS-C3650-24TD-E Standalone with Optional Stacking 24 10/100/1000 Ethernet and 2x10G Uplink ports, with 250WAC power supply, 1 RU, IP Services feature set WS-C3650-48TD-E Standalone with Optional Stacking 48 10/100/1000 Ethernet and 2x10G Uplink ports, with 250WAC power supply, 1 RU, IP Services feature set WS-C3650-24PD-E Standalone with Optional Stacking 24 10/100/1000 Ethernet PoE+ and 2x10G Uplink ports, with 640WAC power supply, 1 RU, IP Services feature set WS-C3650-24PDM-E Standalone with Optional Stacking 24 10/100/1000 Ethernet PoE+ and 2x10G Uplink ports, with fixed 640WAC power supply, 1 RU, IP Services feature set WS-C3650-48PD-E Standalone with Optional Stacking 48 10/100/1000 Ethernet PoE+ and 2x10G Uplink ports, with 640WAC power supply, 1 RU, IP Services feature set WS-C3650-48FD-E Standalone with Optional Stacking 48 10/100/1000 Ethernet PoE+ and 2x10G Uplink ports, with 1025WAC power supply, 1 RU, IP Services feature set WS-C3650-8X24PD-L Standalone with Optional Stacking 24 (16 10/100/1000 and 8 100Mbps/1/2.5/5/10 Gbps) Ethernet and 2x10G Uplink ports, with 715WAC power supply, 1 RU, LAN Base feature set WS-C3650-8X24PD-S Standalone with Optional Stacking 24 (16 10/100/1000 and 8 100Mbps/1/2.5/5/10 Gbps) Ethernet and 2x10G Uplink ports, with 715WAC power supply, 1 RU, IP Base feature set WS-C3650-8X24PD-E Standalone with Optional Stacking 24 (16 10/100/1000 and 8 100Mbps/1/2.5/5/10 Gbps) Ethernet and 2x10G Uplink ports, with 715WAC power supply, 1 RU, IP Services feature set WS-C3650-12X48FD-L Standalone with Optional Stacking 48 (36 10/100/1000 and 12 100Mbps/1/2.5/5/10 Gbps) Ethernet and 2x10G Uplink ports, with 1100WAC power supply, 1 RU, LAN Base feature set WS-C3650-12X48FD-S Standalone with Optional Stacking 48 (36 10/100/1000 and 12 100Mbps/1/2.5/5/10 Gbps) Ethernet and 2x10G Uplink ports, with 1100WAC power supply, 1 RU, IP Base feature set WS-C3650-12X48FD-E Standalone with Optional Stacking 48 (36 10/100/1000 and 12 100Mbps/1/2.5/5/10 Gbps) Ethernet and 2x10G Uplink ports, with 1100WAC power supply, 1 RU, IP Services feature set Cisco Catalyst 3650 4x10G Uplink Series WS-C3650-48TQ-L Standalone with Optional Stacking 48 10/100/1000 Ethernet and 4x10G Uplink ports, with 250WAC power supply, 1 RU, LAN Base feature set WS-C3650-48PQ-L Standalone with Optional Stacking 48 10/100/1000 Ethernet PoE+ and 4x10G Uplink ports, with 640WAC power supply, 1 RU, LAN Base feature set WS-C3650-48FQ-L

Standalone with Optional Stacking 48 10/100/1000 Ethernet PoE+ and 4x10G Uplink ports, with 1025WAC power supply, 1 RU, LAN Base feature set WS-C3650-48FQM-L Standalone with Optional Stacking 48 10/100/1000 Ethernet PoE+ and 4x10G Uplink ports, with fixed 975WAC power supply, 1 RU, LAN Base feature set WS-C3650-48TQ-S Standalone with Optional Stacking 48 10/100/1000 Ethernet and 4x10G Uplink ports, with 250WAC power supply, 1 RU, IP Base feature set WS-C3650-48PQ-S Standalone with Optional Stacking 48 10/100/1000 Ethernet PoE+ and 4x10G Uplink ports, with 640WAC power supply, 1 RU, IP Base feature set WS-C3650-48FQ-S Standalone with Optional Stacking 48 10/100/1000 Ethernet PoE+ and 4x10G Uplink ports, with 1025WAC power supply, 1 RU, IP Base feature set WS-C3650-8X24UQ-L Standalone with Optional Stacking 24 (16 10/100/1000 and 8 100Mbps/1/2.5/5/10 Gbps) Ethernet and 4x10G Uplink ports, with 1100WAC power supply, 1 RU, LAN Base feature set WS-C3650-8X24UQ-S Standalone with Optional Stacking 24 (16 10/100/1000 and 8 100Mbps/1/2.5/5/10 Gbps) Ethernet and 4x10G Uplink ports, with 1100WAC power supply, 1 RU, IP Base feature set WS-C3650-8X24UQ-E Standalone with Optional Stacking 24 (16 10/100/1000 and 8 100Mbps/1/2.5/5/10 Gbps) Ethernet and 4x10G Uplink ports, with 1100WAC power supply, 1 RU, IP Services feature set WS-C3650-12X48UQ-L Standalone with Optional Stacking 48 (36 10/100/1000 and 12 100Mbps/1/2.5/5/10 Gbps) Ethernet and 4x10G Uplink ports, with 1100WAC power supply, 1 RU, LAN Base feature set WS-C3650-12X48UQ-S Standalone with Optional Stacking 48 (36 10/100/1000 and 12 100Mbps/1/2.5/5/10 Gbps) Ethernet and 4x10G Uplink ports, with 1100WAC power supply, 1 RU, IP Base feature set WS-C3650-12X48UQ-E Standalone with Optional Stacking 48 (36 10/100/1000 and 12 100Mbps/1/2.5/5/10 Gbps) Ethernet and 4x10G Uplink ports, with 1100WAC power supply, 1 RU, IP Services feature set WS-C3650-48FQM-S Standalone with Optional Stacking 48 10/100/1000 Ethernet PoE+ and 4x10G Uplink ports, with fixed 975WAC power supply, 1 RU, IP Base feature set WS-C3650-48TQ-E Standalone with Optional Stacking 48 10/100/1000 Ethernet and 4x10G Uplink ports, with 250WAC power supply, 1 RU, IP Services feature set WS-C3650-48PQ-E Standalone with Optional Stacking 48 10/100/1000 Ethernet PoE+ and 4x10G Uplink ports, with 640WAC power supply, 1 RU, IP Services feature set WS-C3650-48FQ-E Standalone with Optional Stacking 48 10/100/1000 Ethernet PoE+ and 4x10G Uplink ports, with 1025WAC power supply, 1 RU, IP Services feature set WS-C3650-48FQM-E Standalone with Optional Stacking 48 10/100/1000 Ethernet PoE+ and 4x10G Uplink ports, with fixed 975WAC power supply, 1 RU, IP Services feature set Cisco Catalyst 3650 8x10G Uplink Series WS-C3650-12X48UR-L Standalone with Optional Stacking 48 (36 10/100/1000 and 12 100Mbps/1/2.5/5/10 Gbps) Ethernet and 8x10G Uplink ports, with 1100WAC power supply, 1 RU, LAN Base feature set WS-C3650-12X48UR-S Standalone with Optional Stacking 48 (36 10/100/1000 and 12 100Mbps/1/2.5/5/10 Gbps) Ethernet and 8x10G Uplink ports, with 1100WAC power supply, 1 RU, IP Base feature set WS-C3650-12X48UR-E Standalone with Optional Stacking 48 (36 10/100/1000 and 12 100Mbps/1/2.5/5/10 Gbps) Ethernet and 8x10G Uplink ports, with 1100WAC power supply, 1 RU, IP Services feature set Cisco Catalyst 3650 2x40G Uplink Series WS-C3650-12X48UZ-L Standalone with Optional Stacking 48 (36 10/100/1000 and 12 100Mbps/1/2.5/5/10 Gbps) Ethernet and 2x40G

0switch(config-if)# show running-config interface vethernet 1version 4.0(4)SV1(2)interface Vethernet3 service-policy type qos input policy1 pinning id 0switch(config-if)# exitswitch(config)# exitswitch# module vem 3 execute vemcmd show pinning LTL IfIndex PC_LTL VSM_SGID VEM_SGID Eff_SGID 48 1b040000 304 0 0 0switch# The following example shows the output after configuring backup subgroups for pinning:switch(config-if)# module vem 4 execute vemcmd show static pinning config LTL IfIndex VSM_SGID Backup_SGID 48 1c0000a0 0, 1,2 50 1c000100 0, 1 switch(config-if)# copy running-config startup-configRemoving a Port Channel Group from a Port Profile You can remove a port channel group from a port profile. Before You Begin You are logged in to the CLI in EXEC mode. Procedure Command or ActionPurposeStep 1switch# configure terminal Enters global configuration mode. Step 2 switch(config)# uplink-network name Specifies then name for the uplink network. Step 3 switch(config-uplink-net)# no import port-profilename Removes the specified uplink port profile policy from the uplink network and sets it to uplink default policy. Step 4 switch(config-uplink-net)# show uplink-network name (Optional) Displays the configuration for verification. Step 5switch(config-port-prof)# copy running-config startup-config (Optional) Saves the change persistently through reboots and restarts by copying the running configuration to the startup configuration. This example shows how to remove a port channel group from a port profile:switch# configure terminal switch(config)# uplink-network up-pcswitch(config-uplink-net)# no import port-profile pcswitch(config-uplink-net)# show uplink-network name up-pcuplink-network: up-pcPublish-name: up-pcimport port-profile: uplink_network_default_policy Shutting Down and Restarting a Port Channel Interface You can shut down and restart a port channel interface. Before You Begin You are logged in to the CLI in EXEC mode.When you shut down a port channel interface, no traffic passes, and the interface is administratively down. Procedure Command or ActionPurposeStep 1switch# configure terminal Enters global configuration mode. Step 2 switch(config)# interface port-channel channel-number Enters interface configuration mode for the specified port channel interface. Step 3switch(config-if)# shutdown | no shutdown shutdown: Shuts down the interface. No traffic passes and the interface displays as administratively down. The default is no shutdown.Brings the interface back up. The interface displays as administratively up. If there are no operational problems, traffic passes. The default is no shutdown. Step 4switch(config-if)# show interface port-channel channel-number (Optional) Displays interface information for the specified port channel. Step 5switch(config-if)# copy running-config startup-config (Optional) Saves the change persistently through reboots and restarts by copying the running configuration to the startup configuration. The following example shows how to bring up the interface for port channel 2:switch# configure terminal switch(config)# interface port-channel 2switch(config-if)# no shutdown Adding a Description to a Port Channel Interface You can add a description to a port channel interface. Before You Begin You are logged in to the CLI in EXEC mode. Procedure Command or ActionPurposeStep 1switch# configure terminal Enters global configuration mode. Step 2 switch(config)# interface port-channel channel-number

Vemcmd show static pinning config LTL IfIndex VSM_SGID Backup_SGID 48 1c0000a0 0, 1,2 50 1c000100 0, 1 switch(config-if)# copy running-config startup-configRemoving a Port Channel Group from a Port Profile You can remove a port channel group from a port profile. Before You BeginYou are logged in to the CLI in EXEC mode. Procedure Command or ActionPurposeStep 1switch# configure terminal Enters global configuration mode. Step 2 switch(config)# uplink-network name Specifies then name for the uplink network. Step 3 switch(config-uplink-net)# no import port-profilename Removes the specified uplink port profile policy from the uplink network and sets it to uplink default policy. Step 4 switch(config-uplink-net)# show uplink-network name (Optional) Displays the configuration for verification. Step 5switch(config-port-prof)# copy running-config startup-config (Optional) Saves the change persistently through reboots and restarts by copying the running configuration to the startup configuration. This example shows how to remove a port channel group from a port profile:switch# configure terminal switch(config)# uplink-network up-pcswitch(config-uplink-net)# no import port-profile pcswitch(config-uplink-net)# show uplink-network name up-pcuplink-network: up-pcPublish-name: up-pcimport port-profile: uplink_network_default_policy Shutting Down and Restarting a Port Channel Interface You can shut down and restart a port channel interface. Before You BeginYou are logged in to the CLI in EXEC mode.When you shut down a port channel interface, no traffic passes, and the interface is administratively down. Procedure Command or ActionPurposeStep 1switch# configure terminal Enters global configuration mode. Step 2 switch(config)# interface port-channel channel-number Enters interface configuration mode for the specified port channel interface. Step 3switch(config-if)# shutdown | no shutdown shutdown: Shuts down the interface. No traffic passes and the interface displays as administratively down. The default is no shutdown.Brings the interface back up. The interface displays as administratively up. If there are no operational problems, traffic passes. The default is no shutdown. Step 4switch(config-if)# show interface port-channel channel-number (Optional) Displays interface information for the specified port channel. Step 5switch(config-if)# copy running-config startup-config (Optional) Saves the change persistently through reboots and restarts by copying the running configuration to the startup configuration. The following example shows how to bring up the interface for port channel 2:switch# configure terminal switch(config)# interface port-channel 2switch(config-if)# no shutdown Adding a Description to a Port Channel Interface You can add a description to a port channel interface. Before You BeginYou are logged in to the CLI in EXEC mode. Procedure Command or ActionPurposeStep 1switch# configure terminal Enters global configuration mode. Step 2 switch(config)# interface port-channel channel-number Places you into interface configuration mode for the specified port channel interface.For channel number, the range is from 1 to 4096. The port channel associated with this channel group is automatically created if the port channel does not already exist. Step 3switch(config-if)# description string Adds a description to the port channel interface.For string, the description can

UMTS (Universal Mobile Telephone System), fourth-generation LTE (Long Term Evolution) and fifth-generation NR (New Radio).However, the CDMA-based 2G and 3G mobile networks use different terminologies for these communication links. In CDMA networks, IS-95 (Interim Standard 1995), CDMA2000 and EVDO (Evolution-Data Optimized), the communication link from the base station to the cell phone is called a forward traffic channel or forward channel. The communication link from the cell phone back to the base station is called a reverse channel.In summary, the downlink communication in CDMA networks (IS-95, CDMA2000 and EVDO) is called a forward traffic channel or forward channel, and the uplink communication in CDMA networks is called a reverse traffic channel or reverse channel.TechnologyNetwork-to-Phone communication Phone-to-Network communicationGSM (2G)DownlinkUplinkUMTS (3G)DownlinkUplinkHSPA (3G)DownlinkUplinkIS-95 or CDMAOne (2G)Forward Traffic ChannelReverse Traffic ChannelCDMA2000 (3G)Forward Traffic ChannelReverse Traffic ChannelEVDO (3G)Forward Traffic ChannelReverse Traffic ChannelLTE (4G)DownlinkUplinkNR (5G)DownlinkUplink— Uplink, Downlink, Forward Channel and Reverse Channel in mobile networks —The terms uplink and downlink are also used in satellite communications. The link from the satellite to the ground is called downlink, and the link from the ground to the satellite station is called uplink. To remember this concept in mobile communications, look at the picture below.As you can see, base station antennas are generally always at a higher position than a mobile phone; therefore, they need to transmit the radio signal downwards, hence the term downlink. On the other hand, a mobile phone generally always has to send the radio signal in the upward direction, hence the term uplink. Of course, this situation may change if you are in a high-rise building, but the terminologies are based on general situations for the majority of the population.The uplink and downlink separation – DuplexingThe uplink and downlink communication links are separate, but the way they are separated from each other may differ depending on the mobile cellular technology, e.g. GSM, UMTS, LTE, NR, etc. The technique used to determine this separation is called a duplexing scheme, which is a fundamental concept in mobile communications. The duplexing scheme determines whether the uplink and downlink communication shall be carried out on separate frequency bands